Welcome to Archers Auto Repair
Premium Automotive Service in Caldwell, ID
If you’re looking for auto repair in Caldwell, ID, you’ve found us. Here at Archers Auto Repair we work hard to earn your trust and loyalty. We know how important it is to find a Caldwell car service you can rely on, so your satisfaction is our top priority each and every day.
Here at Archers Auto Repair we treat our customers as friends and we see them as people not dollar signs. We pride ourselves on honesty and integrity. Combined with our years of experience and technical training this means you can be sure of a worry-free experience.
Mon-Fri: 8am-5pm
Sat-Sun: Closed
Sat-Sun: Closed
Mon-Fri: 8am-5pm
Sat-Sun: Closed
Sat-Sun: Closed
Directions
Shop Amenities
Free WiFi
Waiting Room
Coffee & Snacks
Shop Partners
Why Choose Archers Auto Repair
Archers Auto Repair is dedicated to helping our community with all of their automotive repair needs. We are a full-service auto repair facility with over 25 years of experience. We are dedicated to our customers, and that’s why they stick with us—the best auto repair Caldwell has to offer.
Archers Auto Repair was founded on the basic idea that everyone deserves respect. It is our mission to treat each person that comes through our door with dignity and sensitivity. We believe this attention to detail has paid off by providing us with our loyal, friendly family of customers. That’s what makes Archers Auto Repair the best car service in Caldwell!
- Over 25 Years of Automotive Experience
- ASE Master Certified & Chrysler Certified Specialist
- Serving Caldwell, ID since 2020
The Absolute Best Car Service in Caldwell, ID
What sets Archers Auto Repair apart from all of the others in Caldwell, ID?
Trust: When it comes to auto repair in Caldwell, ID, it’s all about earning loyalty and trust by doing our very best every day. We are determined to earn and keep your trust.
Talent: At Archers Auto Repair, you can rest easy knowing that our highly-skilled, experienced auto service professionals are handling your car. Our technicians bring years of experience, skill, and education to the Caldwell auto repair table.
Time: We take the time we need to provide you with top quality car service in Caldwell, ID, and we take the time to talk to you about what that means. We listen to you so we understand your needs and goals for your auto repair.
Recently Serviced Vehicles
2014 RAM 1500
Mileage
163,188
Service Date
9/13/2023
Services Performed
- Previously recovered DTCs before and after engine repair for oil pressure sensor. Customer requests replacement during engine replacement. Removed and replaced Oil pressure switch with access available and cleared DTCs. Test drove to verify no oil codes returned. CEL still illuminated due to incorrect fit of driver's side mirror with wrong ambient temperature sensor plug. Recommend replacing sensor connector to address CEL. Customer authorized. Removed and replaced ambient air temperature sensor and cleared DTCs.
- Customer states vehicle is overheating and has a coolant leak. Tech pressure tested system and found coolant thermostat housing leaking. Replaced housing and pipe with new parts and cleaned area of residual fluid. Vehicle still overheating. Tech performed coolant combustion gas test and noted contamination. Engine has a cylinder head issue either cracked or leaking. Recommend engine replacement under warranty. Removed components as needed for access and removed engine assembly. Transferred necessary components. Replaced oil pressure sensor with access available. Replaced engine oil cooler filter adapter with inventory part. Installed engine replacement with new plugs, gaskets, and fluids. Verified correct fluid levels and vehicle now starts and runs with no issues. No further overheating issue present at this time.
- Customer states right rear wheel is making noise. Tech inspected rear wheels and noted noise from rear differential. Inspected fluid and found fluid severely contaminated with metal particles. Removed rear differential cover. Removed rear pinion, gears, and bearings. Cleaned rear differential case of residual oil and metal. Replaced both rear wheel bearings and wheel seals. Replaced inner and outer pinion bearings and races. Replaced rear pinion seal. Installed new crush sleeve. Reinstalled rear differential cover and refilled to correct level of new, clean oil. Torqued wheels to spec and test drove vehicle to verify no further noises at this time.
- DIFFERENTIAL CARRIER – Remove, Install, and Overhaul
Lewis S. gave our service a 5 star review on 9/15/2023
2005 Kia Amanti
Mileage
160,244
Service Date
9/1/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Includes testing and inspection of electrical circuits and components as needed. Connect scan tool or other test equipment to determine cause of failure. Removal of components as needed for access.
- Customer states vehicle has a check engine light and no symptoms. Tech recovered DTC P0157 for O2 Sensor. Tech monitored long term fuel trim readings and noted B2S2 Oxygen sensor reading 7.817 and fluctuating voltage. Fuel trim should be close to zero or a negative value. Recommend replacing B2S2 oxygen sensor, clearing codes, resetting adaptations, and reevaluating to verify repair.
- Customer requests check windshield washer reservoir. Washer does not work and fluid drains out. Tech inspected windshield washer system and found the fluid reservoir is cracked and leaking, and the pump does not work. Tech monitored activation through scan tool and verified voltage at wiring. Recommend replacing pump and reservoir.
- Customer requests inspect hood latch and cable. Tech inspected latch system and verified latch is okay. Tech noted the cable system is damaged and needs to be replaced as an assembly.
Tessa V. gave our service a 5 star review on 9/2/2023
2012 RAM Pickup
Mileage
147,760
Service Date
8/15/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Includes testing and inspection of electrical circuits and components as needed. Connect scan tool or other test equipment to determine cause of failure. Removal of components as needed for access.
- Customer states vehicle has a severe oil leak and requests check and advise. Tech inspected vehicle for leaks and noted oil leak coming from under the intake manifold. Authorized removal for access to trace source of leak. Removed intake manifold and found a Multiple Displacement System Solenoid leaking profusely. Other solenoids are not far behind and solenoid wiring harness is saturated with oil. Recommend replacement. Customer authorized. Removed and replaced all four solenoids and harness with OEM Mopar replacement parts. Cleaned areas of residual oil and reinstalled intake manifold with new gaskets. Performed oil change. On inspection, oil pan was saturated with oil and tech recommended a gasket replacement. Customer authorized. After MDS Solenoid replacement, tech cleaned excess oil and added dye to system. Test drove vehicle and rechecked oil pan. Tech verified no leaks appear to be coming from the oil pan and oil was residual from MDS Solenoids. Did not perform oil pan gasket replacement.
- MULTIPLE DISPLACEMENT SYSTEM SOLENOID – Remove & Replace, ALL – V8,5.7L Eng [Includes R&R Intake Manifold]
- On inspection, tech found water pump leaking. Recommend replacement. Customer authorized. Drained cooling system and removed water pump. Replaced with new part and cleaned area of residual fluid. Filled system to correct level of coolant and test drove to verify no further leaks at this time.
- LOF service due. Drain and refill with new oil and replace oil filter.
James E. gave our service a 5 star review on 8/15/2023
2014 Ford Focus
Mileage
180,557
Service Date
8/11/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Customer requests check spark plugs based on mileage and new vehicle. Tech inspected spark plugs on inspection and found plugs beginning to show wear. Recommend spark plugs based on mileage and condition. Customer authorized. Removed and replaced spark plugs with OEM Motorcraft spark plugs.
- SPARK PLUGS – Remove & Replace – Normally Aspirated
- Customer states vehicle has a lag/jerk when coming from a stop. Requests check transmission for services. Tech test drove vehicle and was unable to duplicate condition or concern. Tech inspected transmission fluid and found fluid is dirty. Recommend drain and refill service. Customer authorized. Drained fluid and refilled to correct level with new, clean Ford OEM Fluid for Dual Clutch transmission. Test drove vehicle and verified all operations performing as designed at this time.
- AUTOMATIC TRANSMISSION FLUID – Drain & Refill – Trans Mfr CD DPS6
- Clean build-up from throttle body and idle air control motor where applicable. De-carbon intake system and combustion chambers. Add long term fuel system treatment to tank.
- Isolate injector rail from fuel system. Chemical flush all injectors with Valvoline professional-grade injector cleaner.
- Brake fluid dirty and contaminated. Flush brake system and fill with up to 1 Qt of new, clean brake fluid. Bleed system.
Becki B. gave our service a 5 star review on 8/11/2023
2006 Ford Mustang
Mileage
105,109
Service Date
8/3/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Includes testing and inspection of electrical circuits and components as needed. Connect scan tool or other test equipment to determine cause of failure. Removal of components as needed for access.
- Customerr states vehicle has a Check Engine Light. Tech recovered DTC P0300 and P0303 for a misifre. Tech moved Cylinder 3 plug to Cylinder 2, and moved Cylinder 3 Ignition Coil to Cylinder 1. Misfire stayed at Cylinder 3. Monitored Cylinder contribution and misfire and found Cylinder 3 not within appropriate values. Swapped Cylinder 3 Injector with Cylinder 2 and misfire followed. Recommend replacing one or all fuel injectors. If only one injector, flush remaining injectors. Customer authorized only one injector replacement and fuel injector flush. Tech replaced Original Cylinder 3's fuel injector and performed Fuel Injector Flush. Cleared DTCs and test drove vehicle to verify no codes have returned at this time and misfire has gone away.
- FUEL INJECTOR – Remove & Replace – V8 One
- Isolate injector rail from fuel system. Chemical flush all injectors with Valvoline professional-grade injector cleaner.
- On inspection, tech noted vehicle pulls to the right. Recommend alignment. Customer authorized. Performed Alignment under sublet through Big O Tires. Tire shop noted front tires are larger than rears.
- Tech recommends tire replacement soon. Passenger rear tire is leaking and walls are extremely cracked. Tire shop also noted front tires are larger than rears. Customer states tires are due to be replaced anyways.
Jeremiah P. gave our service a 5 star review on 8/3/2023
2013 RAM 1500
Mileage
129,695
Service Date
7/21/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- FOUND FRONT STRUTS LEAKING AND WORN. REPLACED WITH NEW STRUTS. FOUND SWAY BAR LINKS WORN AN MAKING NOISE AS WELL AS SWAY BAR BROKEN DUE TO RUST CORROSION. REPLACED SWAY BAR AND SWAY BAR LINKS WITH NEW ONES. TEST DROVE VEHICLE AND NO MORE NOISE AT THIS TIME. VEHICLE OPERATING AS INTENDED AT THIS TIME.
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – 4WD w/Coil Spring Suspension,Both Sides – [DOES NOT include alignment.]
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
Pat I. gave our service a 5 star review on 7/21/2023
2014 RAM 1500
Mileage
163,124
Service Date
7/20/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Customer requests engine replacement due to rod knocking. Tech verified condition. Removed valve covers, intake manifold, and all other components as needed for access. Removed engine assembly from vehicle and transferred necessary components to used engine with ~40k miles recorded. Transferred original upper and lower oil pan. Replaced spark plugs. Installed used engine assembly and reassembled. Installed valve cover with new gaskets, and installed original intake manifold with new gaskets. Filled system to correct level with new, clean oil and coolant. Replaced oil filter and vehicle now starts and runs with no knocking noises and no performance issues.
- ENGINE ASSEMBLY (COMPLETE) – Remove & Replace – V6,3.6L Eng – [Includes: R&I Engine Assembly. Transfer Fuel and Electrical Assemblies and Engine Mounts. DOES NOT include transfer of Manifolds, Valve Cover(s), Timing Cover(s), Oil Pan and/or Water Pump. NO
- On inspection, tech's prescan recorded DTCs P0038, P0480, P0520, P0522, U110E, P1B13, U11E3, C2101-17, C1082-01, C212A-16, C212A-17, B2199-17, U0147-00, B16B7-15, C2129-17, C2128-00. After engine replacement, some codes have gone away but tech noted others remaining including DTCs for Oil Pressure Circ, etc.
- Customer requests inspect wheel bearings. Tech found right front wheel bearing noisy – Recommend replacing both front wheel bearing and hub assemblies. Tech also noted on inspection that front brake pads are measuring at 2mm. Recommend front brakes replacement with hubs for labor overlap. Customer authorized. Removed rotors and wheel hub assemblies. Tech noted right side caliper cracked and leaking. Replaced caliper at no cost to customer. Replaced wheel hubs with new parts and replaced front brake pads and rotors. Bled brake system. Replaced locking lug nuts with regular lug nuts and torqued wheel to spec. Test drove vehicle to verify all brake operations performing correctly and no further noises from front bearings at this time.
- Customer states wheels have special locking lug nuts and requests replacement. Tech removed locking nuts and replaced with regular ones.
- On inspection, tech noted upper ball joints have play. Recommend replacement. Customer authorized. Removed and replaced both front upper ball joints while front wheels were removed.
Lewis S. gave our service a 5 star review on 7/21/2023
2004 Toyota Corolla
Mileage
235,405
Service Date
7/18/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- Customer requests A/C compressor and belt replacement due to compressor not engaging. Tech verified A/C inop. Checked system charge and verified refrigerant is full but still not working. Checked power and ground to compressor and both were good. Recommend compressor replacement. Customer authorized. Evacuated A/C system and replaced failed compressor. Installed new belt while old one was removed. Replaced schrader valves, seals, and recharged system with leak detection dye to 1.1 lbs of R-134A type refrigerant. Checked system for leaks with UV light and sniffer and found no leaks at this time. A/C now blows cold.
- Complete inspection of A/C system. Evacuate system and recharge with A/C Leak detection dye with and up to 1 Lb of R134A refrigerant.
- A/C COMPRESSOR – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
- On inspection, tech found spark plugs worn and recommended replacement. Customer authorized. Removed and replaced all spark plugs with OEM brand parts. No further recommendations at this time.
Steve B. gave our service a 5 star review on 7/21/2023
2013 Chevrolet Tahoe
Mileage
147,023
Service Date
7/13/2023
Services Performed
- LOF service due. Drain and refill with new oil and replace oil filter.
- Previously recovered DTC P015B for B1S1 Oxygen sensor and cleared codes. If DTC returned, recommended O2 sensor replacement. Verified DTC and customer authorized repair. Removed and replaced B1S1 Oxygen Sensor and cleared codes. Test drove vehicle and verified no codes returned.
- OXYGEN SENSOR – Remove & Replace – 4WD One,Left Bank,Front
Theresa J. gave our service a 5 star review on 7/13/2023
2009 Dodge Pickup
Mileage
201,997
Service Date
6/29/2023
Services Performed
- Customer states A/C does not blow cold and compressor does not engage. Tech evacuated A/C system and recovered 0.08 lbs of refrigerant out of 1.63 lb capacity. Tech found low side schrader valve leaking. Replaced both valves and recharged system to full capacity. Tech inspected system and did not find any further leaks at this time. A/C blows cold.
- Complete inspection of A/C system. Evacuate system and recharge with A/C Leak detection dye with and up to 1 Lb of R134A refrigerant.
Rick H. gave our service a 5 star review on 6/29/2023
2007 Chevrolet TrailBlazer
Mileage
154,378
Service Date
5/16/2023
Services Performed
- Includes testing and inspection of electrical circuits and components as needed. Connect scan tool or other test equipment to determine cause of failure. Removal of components as needed for access.
- Customer states vehicle has a no-start condition. Has power, but nothing happens when trying to start vehicle, key gets stuck in ignition. Tech was able to duplicate concern. Tech recovered DTCs P0128: Coolant Thermostat. P0506: Idle Control System (RPMS too Low). U1064: Loss BCM, Vehicle Theft Deterrent, DIM, P2M, & OR SBM Data. Tech noticed radio is aftermarket and will stay on after vehicle is shut off. Removed components as needed for access to radio and disconnected unit. Vehicle now starts and runs with no issues. Key turns fine. Reconnected radio and tech is still unable to revive condition. Recommend radio removal or replacement. Customer request disconnect radio only. Recommend performing diag on other DTCs.
Desiree C. gave our service a 5 star review on 5/16/2023
2012 RAM Pickup
Mileage
146,774
Service Date
5/10/2023
Services Performed
- Inspect vehicle and note body damage and lights operations (warning, indicator, exterior, interior). Test drive vehicle and check all systems including brakes, steering, engine performance, and account for visible leaks.
- LOF service due. Drain and refill with new oil and replace oil filter.
Jordan B. gave our service a 5 star review on 5/12/2023
Services:
- Brakes & Brake Repair
- Oil Changes
- A/C Service & Repair
- Check Engine Light
- Belts & Hoses
- And Much More...
Location: